The NFPA-compliant Innerzone 2™ features a two-piece strap system with Snap-on/Snap-off™ helmet mounting brackets. Each strap contains a circular grommet that snaps on and off the two mounting brackets, which attach to a helmet brim with no drilling required:
This patented system allows the goggles to be stowed in a pocket and quickly deployed, or they can remain attached to the brackets and kept on either the front or back of the helmet. In either case, this system works extremely well in conjunction with face shields or Bourke flip-downs.
Firefighters can use the Innerzone 2™ alone or together with flip-downs or a face shield. The patented ESS Speed-Clip™ strap system makes adjusting the Innerzone™ straps quick and easy, even with gloves on.
The full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and debris.
The roomy Striker™ frame is designed to fit over most eyeglasses.
Thick, 2.6mm polycarbonate lenses offer maximum impact protection and optical clarity. These lenses feature ESS' advanced ClearZone™ FlowCoat lens treatments, which provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside.
All Innerzone™ goggles are certified to meet the NFPA 1971-2007 structural fire equipment performance requirements, including the 500°F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2010, and are considered Primary Eye Protection by NFPA 1500. All Innerzone™ lenses provide 100% UVA/UVB Protection.
Patents: #6,047,410, #6,490,729 B1, #6,708,340 B1
“I would like to send you this letter stating how effective your Innerzone goggles have been to me. Last December, our department responded to a fully involved structural fire in which I was on the initial attack and search for two victims trapped inside. The heat was much more intense than other fires I have been in. Afterwards, upon inspecting my gear, I noticed that the goggles were in great shape after being unprotected on my helmet through this situation.
We were recently dispatched to an auto accident where we had to extricate a victim from one of the vehicles. Our pressurized hydraulic line to the tool ruptured, and I thank my ESS goggles for protecting my eyesight and allowing me to continue working, even though I was covered in hydraulic fluid.
Once again, these goggles have proven to me that they are effective and durable. Our whole department now uses ESS Goggles! Thank you!”
– Travis Anderson, Firefighter/EMT, Enon Fire Department, OH